|
 
| |
Features |
| |
Microprocessor based design.
Auto - calibration function.
Auto - Temp. compensation.
High accuracy ＆ stability，Low drift and quick response.
Membrane key board for dust and water splash proof.
|
PHC-200 / PHC-201
|
|
|
Specification |
|
Model :
PHC-200
| Range： |
pH
0.00 ~ 14.00 pH / mV -1999 ~ +19999 mV / Temp. -10 ~ +100℃
|
|
Resolution：0.01pH，1mv，0.1℃ |
| Accuracy(Tamb＝25℃)： |
±0.01pH，±1mv，±1℃，(+1
digit)
|
Temp.
Compensation：Manual
0 ~ +100℃
Calibration：Single
or dual point
Slope Control：Manual
Display：0.5"
digital LCD display , with function directing
Auto-Check Functions：Low
battery alarm.
Input Connector：Standard
BNC connector.
Input Impedance：Greater
then 1012
Ω |
| Power： |
One
9V 006P Battery.（IEC
6F 22），Battery
Life : Approx.250 Hours. |
|
Power : one 006p 9V battery |
| Dimensions
/ Weight： |
180×80×35mm.
Approx. 250 gms.（※Meter only）
|
| |
Model :PHC-201
| Range： |
pH
0.00 ~ 14.00 pH / mV -1999 ~ +1999 mV / Temp -10 ~ +100℃
|
|
Resolution：0.01pH，1mv，0.1℃ |
| Accuracy(Tamb＝25℃): |
±0.01pH，±1mv，±1℃，(+1
digit)
|
Temp.
Compensation:Manual
＆ Auto（0
~ +100℃）
Calibration：Automatic
Slope Control：Automatic |
| Display: |
TWIN
digital LCD display for pH-Temp. or mV-Temp. reading in the
meantime without switching, and multi-function directing. |
| Auto-Check Functions: |
Low
battery alarm. "E--1" Electrode deviation from ZERO
point.
"E--2" Electrode deviation from SLOPE point. |
Input
Connector:Standard
BNC connector.
Input Impedance:Greater
then 1012
Ω |
| Power： |
One
9V 006P Battery.（IEC
6F 22），Battery
Life : Approx.250 Hours. |
|
Power : one 006p 9V battery |
| Dimensions
/ Weight： |
180×80×35㎜.
Approx. 250 gms.（※Meter only）
|
|
|
|
| (B) PH PEN |
|
Features
|
| |
It is equipped with 7.0 buffer solution for calibration.
Extened Probe.
|
|
Specifications |
| |
Range：0 ~ 14.0 pH.
Resolution：0.1 pH.
Accuracy：±0.2 pH.
Power：One 9V 006P Battery.
Dimensions：158（L）×40（W）×34（D）㎜ |
|
|
|
|
|
|
(C)
Conductivity Meter
|
| |
Features |
|
Microprocessor based design.
High Stability , Low drift.
Auto - Calibration , Auto range lock , Auto Temp. compensation.
Membrane key board for dust and splash proof.
Cell constant adjust able from 0.005 to 1.500. |
| |
Specifications |
|
| Range： |
Conductivity 0 ~20.00 μs/cm，0 ~ 200.0 μs/cm，
0 ~2.000 ms/cm，0 ~ 20.00
ms/cm，Temperature 0 ~ 100℃ |
Auto Range：latch relay switch for auto range Connect Resistance＜0.1Ω
Resolution：conductivity : 0.01/μs/cm，Temperature : 0.1℃
Accuracy（Tamb＝25℃）：conductivity : ±1﹪F.S. Temperature : ±0.3℃
Temp. Compensation：0 ~ 100℃ Automatic compensation.
Cell：three-element gold electrodes, built-in ATC sensor. |
| Display： |
TWIN digital LCD display for conductivity and temperature reading in the mean-time , with multi-function directing. |
Ambient / Operating Temperature：0 ~ 50℃（32 ~122℉）
Power：One 9V 006P Battery（IEC 6F 22）, Battery Life : Approx.250Hours.
Dimensions / Weight：180×80×35㎜. Approx. 250
gms.（※Meter only） |
|
|
|
|
|
(D)
PH / ORP and conductivity controllers
|
| |
Specifications |
|
| Model：P.H / ORP-101 ＆ P.H / ORP-102 |
Range：0 to 14pH , -1999 to +1999mV
Resolution：0.01pH ,1mV
Accuracy（Tamb＝25℃）：0.01pH , ±1 digit , 1mV ±1 digit
Temp. Compensation：Auto（ATC probe）or Manual
Ambient Temp.：0 to +60℃
Display：3½ , 0.8" LCD digital display with function indicator
Signal Output：DC 4 to 20mA , Max. Load 1 kΩ
Control Action：ON / OFF
Set Point：Hi / Lo
＆ Hi-Hi / Lo-Lo
Impedance：＞1012
Ω
Power：110V , 220VAC ±12﹪, 50 /60 HZ
Cut Out Dimension：135（H）㎜×135（W）㎜×183（D）㎜
Weights：1.45Kg
|
P.H / ORP-101 ＆ P.H / ORP-102 |
Model：EC-106
＆ RC-107
Range：0 to 20000μs/cm
＆ 0 to 20.00MΩ-㎝
Resolution：0.01/μs/cm
＆ 0.01 MΩ-㎝
Accuracy（Tamb＝25℃）：±2.0﹪
F.S.
Temp. Compensation：Auto（ATC probe）0 to 100℃
Ambient Temp.：0 to +60℃
Display：3½ , 0.8" LCD digital display with function indicator
Signal Output：DC 4 to 20mA , Max. Load 1 kΩ
Control Action：ON / OFF
Set Point：Hi / Lo
Impedance：＞1012 Ω
Power：110V , 220VAC ±12﹪, 50 /60 HZ
Cut Out Dimension：135（H）㎜×135（W）㎜×183（D）㎜
Weights：1.45Kg |
|
|
|
|
|
|
|
|
